Bending material types:
Steel profiles: round, square, channel, angle, I-beam, flat steel, etc.
Stainless steel: square pipe, round pipe, profile, elliptical pipe and special-shaped pipe, etc.
Copper material: square pipe, circular pipe, profile, elliptical pipe and special-shaped pipe, etc.
Aluminum profiles: building decoration with a variety of special-shaped materials and balcony railings, handrails and so on.
Long stretch and bend length: 9-12.5 M
Small bending radius: not limited by equipment, only limited by the cold bending performance of the material itself, in the case of material mechanics permits.
Bending properties: standard circular solitary, elliptical solitary, non-standard circular solitary, U-shaped, S-shaped, symmetrical and asymmetrical arcs.
After bending mass:
All kinds of profiles can be formed at one time, such as spraying, polishing, electroplating, electrophoresis, drawing mirror surface, etc. Surface treated materials can be stretched and bended without damage or deformation. Because of cold bending processing, the strength of materials can also be improved.
Profiles with cavity and complex cross-section can be formed at one time. When the relative bending radius is allowed, the inner wall will not wrinkle and the section will not distort.
The tension bending can effectively eliminate the residual stress in the material, and the dimensional stability of the product is good.
Due to the cold work hardening of metal materials, the comprehensive mechanical properties of materials can be improved after stretching and bending.
Various curve shapes can be bent
In addition to conventional standard arcs, it can also bend a series of complex curves such as U-shaped, S-shaped, W-shaped, elliptic, parabolic, straight section of arc belt, conical curve and multiple radii on a curve.